AUTODIALER PRI 3xE1

- least-cost router - PRI interface
- it is inserted  between the PBX and the Public Exchange
- 3x E1 interface (120 / 75 Ohm, RJ 45 / BNC)
- signalling E1: ISDN DSS1 / R2 MFC
- possibility to change signalling from R2 MFC to DSS1 and vice versa
- interface diagnostic: E1-A/B/C
- data interface (2x): X.21/ V35/ V.36/ RS530/ RS232
- 1x RS232 (V24)
- interface 1x Ethernet 10/100 BT for device configuration

- calls re-routing from E1A to E1B resp. E1C, based on dial analysis
- one-step dial - carrier prefix+called party number
- two-step dial - call to carrier, after connect - identification number+called party number(DTMF)
- up to 19 spaces for carrier number and 19 spaces for user ID number
- calls routing to max.8 carriers resp. no routing
- routing exceptions
- real or pseudo charging, real time clock
- dialling tone 425 Hz detection and 1100/1633 Hz tone detection for real charging
- possibility to reserve the specified E1 timeslots for external data transmission- crossconnect (DACCS)
- bypass connection E1A-E1B, if the device is off or out of order
- calls statistics
- local configuration from connected PC via V.24(RS232) interface
- possibility to save the settings (configuration) to PC
- remote configuration using internal ISDN modem, external analog modem or via TCP/IP
- possibility to change firmware - upgrade (also remotely)

- product code:
ITX48203.2 Autodialer 3xE1
ITX48203.3 Autodialer 3xE1, 2xX.21
ITX48203.4 Autodialer 3xE1, 2xUDI
ITX48203.6 Network Router 2xE1 BNC
ITX48203.7 Autodialer 3xE1 BNC, 2xX.21
ITX48203.8 Autodialer 3xE1 BNC, 2xUDI
ITX48203.10 Autodialer 2xE1 BNC
(UDI-universal data interface)